- Gas Turbine Flow Meter Monitor Devices for Gas Flow Measurement
- 2017-12-18 07:17
- The liquid turbine flow meter are specially designed for usage in water, diesel, gasoline and other fluid measurement and control systems. They operate according to the turbine principle, i.e. the speed of an impeller turning in the fluid flow is measured
- Ultrasonic Level Sensors for Fuel Tank
- 2017-12-18 07:11
- Introductions UTG21-PS is separate type the sensor PTFE material can be used for a variety of corrosive occasions. Feature 1.Range: 0~15m 2.Blind area: 0.25m~0.5m 3.Ranging accuracy : 0.3% (Standard condition) 4.Ranging resolution: 1mm 5.Pressure: Less th
- Paint Thickness Tester Meter Gauge CM8825FN
- 2017-12-14 23:40
- A Specification 1. In built probe(s) 2. Operating principle: magnetic induction/eddy current (F/NF) 3. Measuring range:0-1250um/0-50mil 4. Resolution; 0.1/1 5. Accuracy: ±1-3%n or ±2.5um 6. Min. measuring area: 6mm 7. Min. sample thickness: 0.3mm 8. Batte
- Rebound Hammer Test Concrete Hardness Tester
- 2017-12-05 12:47
- HT-225W+ Removable lithium battery typed digital concrete hardness tester. It is a high-tech product especially designed for the needs of in place test for concrete compressive strength, applied to NDE for all kinds of concrete compressive strength compon
- Electromagnetic Flowmeter Magflow EMF Insertion Type for Slurry
- 2017-11-24 20:44
- ● Size: DN6~DN2800 ● Medium: Conductive liquid, slurry ● Medium Temperature: E grade∠60℃.H grade∠180℃ ● Conductivity:≥5 u S/cm ● Accuracy:±0.25% . ±0.5% ● Repeatability: ±0.1% . ±0.17% ● Rated Pressure: 0.6, 1.0, 1.6, 2.5, 4.0, 6.4 MPa (or specified by cu
- Concrete Rebound Hammers HT-225 Series
- 2017-11-12 06:03
- Concrete test hammer is applied to test the compressive strength of building concrete components, bridge, and so on which Especial popular in civil engineering of non-destructive test or NDE evaluation. 1)High quality material Center rod to make sure more
- Vortex Liquid Flow Meters for Water and Crude Oil
- 2017-09-28 22:38
- TEMGB vortex flowmeter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline. The periodi
- Open Channel Flowmeter Monitoring Water
- 2017-09-22 21:58
- Sensor installation Ultrasonic probe was install on the top of the flume, measuring the water level in the flume. Transmitter calculate the open channel instantaneous flow rate according to the water level and flume type and get the value of cumulative fl
- Vortex Flow Meter for Compressed Air and Stream and Natural Gas
- 2017-09-21 08:42
- TEMGB vortex flowmeter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline. The periodi
- Ultrasonic Level Transmitters UTG21 Series
- 2017-09-14 21:48
- UTG21-PY includes several proprietary technologies, is safe and clean, with high precision and long service life, stable and reliable, and convenient to install and maintain, and is applicable to various fields of acid, alkali, salt, anti-corrosion, and h
- Hand Held Ultrasonic Thickness Meter Measurement
- 2017-08-31 16:55
- Features A With high power of emission and broad band of receiving sensitivity, the gauge can match probes of different frequencies. That makes it easy to measure the rough surface, even cast iron. It is widely used in almost all kinds of industries. B Au
- Concrete Scanning Rebar Scanner ZBL-R800 Corrosion Detector
- 2017-08-21 03:40
- Introduction ZBL-C310A rebar corrosion detector is a specialized apparatus; it is designed according to the electrochemical testing method (natural potential method) of “construction testing technical standard”. By using the electrode polarization theory,
- Non-Contact Ultrasonic Level Meter Measurement Liquid
- 2017-08-08 23:46
- Introduction of Ultrasonic level meter UTG21-BE is a non-contact one and dose not directly contact liquid, so the fault rate is low . The meter's all input and output lines must be with such protection functions as lightning protection and short circu
- Digital Coating Thickness Gauge CM8825FN Car Painting Tester
- 2017-07-13 09:04
- A specification 1. In built probe(s) 2. Operating principle: magnetic induction/eddy current (F/NF) 3. Measuring range:0-1250um/0-50mil 4. Resolution; 0.1/1 5. Accuracy: ±1-3%n or ±2.5um 6. Min. measuring area: 6mm 7. Min. sample thickness: 0.3mm 8. Batte
